IBASE Technology MI945PA, User Manual

Page: 32 / 67

BIOS SETUP
28 MI945PA User’s Manual
BIOS SETUP UTILITY
Main
Advanced
PCIPnP Boot Security Chipset Exit
IDE Configuration
Options:
Disabled
Compatible
Enhanced
<- Select Screen
↑↓
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Mirrored IDER Configuration [Enabled]
SATA#1 Configuration [Compatible]
Configure SATA#1 as [IDE]
SATA#2 Configuration
►
Primary IDE Master : [Not Detected]
►
Primary Slave Master : [Not Detected]
►
Secondary IDE Master : [Hitachi HDS72]
►
Secondary IDE Slave : [Not Detected]
►
Third IDE Master : [Not Detected]
►
Fourth IDE Master : [Not Detected]
►
Primary IDE Master : [Not Detected]
►
Fifth IDE Master : [Not Detected]
►
Fifth IDE Slave
IDE Detect Time Out (Sec)
ATA(PI) 80Pin Cable Detection
: [Not Detected]
[35]
[Host & Device]
The IDE Configuration menu is used to change and/or set the
configuration of the IDE devices installed in the system.
SATA#1 can be
configured as IDE, Raid or AHCI.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP Boot Security Chipset Exit
Hardware Health Configuration
<- Select Screen
↑↓
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
System Temperature :45°C/113°F
CPU Temperature :45°C/113°F
Chassis Temperature :33°C/102°F
SYSTEM Speed :0 RPM
CPUFAN Speed :5400 RPM
Vcore(V) :1.160 V
AVCC :3.392 V
3VCC
12V :3.392 V
:12.196 V
1.8V :1.856 V
5V : 5.273V
VSB : 3.392V
VBAT (V) :3.21 V
ACPI Shut down Temperature 95°C/203°F
The Hardware Health Configuration menu is used to show the operating
temperature, fan speeds and system voltages.