INSTALLATIONS
J6: Power LED Connector
Pin #
Signal Name
1 LED+
2 No
connect
3 Ground
MI933 User’s Manual
17
J7 (F_PANEL): System Function Connector
ATX Power ON Switch: Pins 1 and 2
This 2-pin connector is an “ATX Power Supply On/Off Switch” on the
system that connects to the power switch on the case. When pressed, the
power switch will force the system to power on. When pressed again, it
will force the system to power off.
Hard Disk Drive LED Connector: Pins 3 and 4
This connector connects to the hard drive activity LED on control panel.
This LED will flash when the HDD is being accessed.
Pin #
Signal Name
4 HDD
Active
3 5V
Reset Switch: Pins 5 and 6
The reset switch allows the user to reset the system without turning the
main power switch off and then on again. Orientation is not required
when making a connection to this header.
+5V and 5VSB Signals: Pins 7 and 8
Pin #
Signal Name
7 +5V
8 +5VSB
Summary of Contents for MI933
Page 1: ...MI933 AMD Sempron 200U 210U Single Core Sempron Mini ITX Motherboard USER S MANUAL Version 1 0...
Page 4: ...iv MI933 User s Manual This page is intentionally left blank...
Page 8: ...INTRODUCTION Board Dimensions 4 MI933 User s Manual...
Page 58: ...APPENDIX 54 MI933 User s Manual This page is intentionally left blank...