INSTALLATIONS
Installing the Memory
The MI933 board supports one DDR2 memory socket for a maximum
total memory of 2GB in DDR2 memory type.
Installing and Removing Memory Modules
To install the DDR2 modules, locate the memory slot on the board and
perform the following steps:
1.
Hold the DDR2 module so that the key of the DDR2 module aligned
with that on the memory slot.
2.
Gently push the DDR2 module in an upright position until the clips of
the slot close to hold the DDR2 module in place when the DDR2
module touches the bottom of the slot.
3.
To remove the DDR2 module, press the clips with both hands.
DDR2 Module
Lock
Lock
Lock
Lock
6
MI933 User’s Manual
Summary of Contents for MI933
Page 1: ...MI933 AMD Sempron 200U 210U Single Core Sempron Mini ITX Motherboard USER S MANUAL Version 1 0...
Page 4: ...iv MI933 User s Manual This page is intentionally left blank...
Page 8: ...INTRODUCTION Board Dimensions 4 MI933 User s Manual...
Page 58: ...APPENDIX 54 MI933 User s Manual This page is intentionally left blank...