manualshive.com logo in svg

IBASE Technology MB835, User Manual

Share
Download
IBASE Technology MB835 User Manual Download Page 7

INSTALLATION 

                              MB835 User’s Manual 

3 

 
 

 

MB835 Specifications 

 

Model 

MB835 Motherboard 

Form Factor 

Custom Size 

Processor 

Intel EP80579 SOC processor with ASU & SSU 
Frequency: 600 / 1000 /1200 MHz 
L2 cache: 256kb 

Memory 

2x DDR2 sockets, supporting DDR2 400,533,667 and 800 Max 2GB memory
with ECC (600Mhz CPU at DDR2 533 only) 

Chipset 

Integrated Intel® Architecture (IA) processor and chipset (MCH/ICH) 
technology; 1088-Ball FCBGA package 

BIOS 

Award BIOS 

PCIe Switch 

PEX8509 of PLX: Gen1 8Lanes / 8Ports PCIe switch (up: 4 lanes 
/down:1lanes) 
Connect from: PCIeX4 bus of EP80579 
Connect to : Intel 82574L GbE 
           JM368 PCIe to PATA bridge 
           PEX8112 PCIe to PCI bridge 
           PCIeX1 golden finger 

PCI bridge 

PEX8112 of PLX: PCIe to PCI bridge, max for 4PCI 
Connect from: PCIeX1 bus of PEX8509 downstream 
Connect to: HIFN 7964 IPSec onboard MiniPCI slot PCI32 golden finger 

Ethernet controller

Intel EP80579 integrated 3x GbE MACs(RGMII) link to Marvell 88E1145 
Quad PHYs with 3x RJ45 on the edge connector 
Onboard Intel 82574L GbE with RJ45 on the edge connector 

Ethernet bypass 

Default ETH0 ~ ETH3 with bypass, optional function, can be controlled by 
GPIO and WDT) 

IPSec 

HIFN 7964 (pin to pin compatible with 7965 and 7966, optional function) 
Connect from: PCI bus from PEX8112 
(PCI bus must be 32bit / 66Mhz) 

USB 

Intel EP80579 build-in 2X USB2.0 host controller with 1x USB stack 
connector on edge connector 

SATA 

Intel EP80579 build-in 2X SATA controller with 2XSATA onboard 7-pin 
shrouded vertical connector 

Compact flash 
(PATA) 

Jmicron JM368 PCIe to PATA bridge 
Connect from: PCIeX1 bus of PEX8509 downstream 
Connect to: onboard CF type II socket, support UDMA mode 

LPC I/O 

Winbond W83627DHG 
COM1 with RJ45 on edge connector for console redirection 
COM2 for LCM function, Hardware monitor, 
COM3 & COM4 from EP80579 built in UART with box header 

Keyboard / mouse 

PS/2 keyboard & mouse support with pitch 2.54mm pin header 

Expansion slot & 
connector 

1x onboard MiniPCI slot 
1x LAN module expansion connector 
1x pitch 2.0mm 44-pin HDD connector for ID370 LED board  

Edge connector 

4x RJ45 connector with LED for GbE, 1x USB vertical connector 
1x console redirection via RJ45 without LED 

Onboard connector

ATX 20P connector, 3x 3P fan header with Smart FAN function 
2x SATA controller with 2x SATA onboard 7-pin shrouded vertical 
connector 
1x COM2 port for LCM, 2x COM ports for COM3 & 4 
1x PS/2 keyboard/mouse, 1x USB2.0, 1x right angle SAMTEC 
MEC1-140-02-L-D-RA1-SL Hi-Speed connector for LAN module IBP835

TDM 

Intel EP80579 Integrated Processor with QuickAssist Technology 
Reserved interface (headers) for future connection to proprietary E1/T1 board

Power 

ATX 

WDT 

Yes (256 segments: 0, 1, 2,..., 255 sec/min) 

 

Summary of Contents for MB835



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands