IBASE Technology IP414, User Manual

Page: 42 / 49

34 IP414
User’s Manual
2.4.17 System Function Connector ( J17)
Pin Signal Name Pin Signal Name
1 Power BTN 2 Power BTN
3 HDD LED+ 4 HDD LED-
5 Reset BTN 6 Reset BTN
7 Power LED+ 8 Power LED-
J13 provides light indication of the computer activities and switches to change the
computer status.
•
ATX Power ON Switch (Pins 1 and 2)
The 2 pins make an “ATX Power Supply On/Off Switch” that connects to the
power switch on the case. When pressed, the power switch will force the
system to power on. When pressed again, it will power off the system.
•
Hard Disk Drive LED Connector (Pins 3 and 4)
This LED will flash when the HDD is being accessed.
•
Reset Switch (Pins 5 and 6)
The reset switch allows you to reset the system without turning the main
power switch off and then on again.
•
Power LED (Pins 7 and 8)
This connector connects to the system power LED on control panel. This
LED will light when the system turns on.