30
IBR115
User’s Manual
4.1.5
Building RAMdisk Image (Optional)
1.
Enter IBR115.
cd /home/ibr115
2.
Running the script below.
./build.sh ibr115
3.
See the image in the "release" directory.
ls release/ibr115-20170519-030011/
rootfs.tar.bz2 u-boot-imx6dlsabresd.imx zImage zImage-imx6dl-sabresd.dtb
4.1.6
Install Linux to MicroSD Card
1.
Refer to the section
3.1
Make a Recovery MicroSD Card
in chapter 3.
2.
Run the make card script below.
./make_sd.sh /dev/sdd 20150814-111827
3.
The appearance of the sentence "SD card for booting create done"
indicates the installation is successfully done.
4.
Pull out the microSD card
4.1.7
Booting with Your MicroSD Card
Insert the microSD card to your board and insert special COM port dongle to
boot from microSD. Connect a debug cable to debug port with serial port
115200/N/8/1 setting on your PC’s serial port program, such as
hyperterminal/teraterm. Connect LVDS 15
” display panel. Power on and you
will see U-Boot prompt.
If you want to change to another monitor (or display panel) type, refer to the
section
3.2 Display Parameter Setting in Kernel
to set video output
command.
Summary of Contents for IBR115
