Driver Installation
IBR115
User’s Manual
27
3
4.
The appearance of the sentence "Yocto is installed to eMMC SD CARD
UPGRADE END Please power down and pull out microSD" indicates
the installation is successfully completed.
5.
Power down and pull out microSD.
3.2
Display Parameter Setting in Kernel
IBR115 supports LVDS 15
” output by default.
1.
If you use HDMI to display, run the command
/home/root/display_config/config_displag_mode.sh 1
2.
If you use LVDS 7
” to display, run the command
/home/root/display_config/config_displag_mode.sh 2
3.
If you use LVDS 15
” to display, run the command
/home/root/display_config/config_displag_mode.sh 3
Summary of Contents for IBR115
