![background image](http://html1.mh-extra.com/html/ibase-technology/ib919-series/ib919-series_user-manual_3244642064.webp)
56
IB919 Series User’s Manual
4.4.12 USB Configuration
BIOS Setting
Description
Legacy USB Support
•
Enabled
enables Legacy USB support.
•
Auto
disables legacy support if there is no
USB device connected.
•
Disabled
keeps USB devices available only
for EFI applications.
XHCI Hand-off
This is a workaround for OSes without XHCI
hand-off support. The XHCI ownership change
should be claimed by XHCI driver.
USB Mass Storage
Driver Support
Enables / Disables the support for USB mass
storage driver.
Port 60/64 Emulation
Enables / Disables the support for I/O port 60h /
64h emulation. This should be enabled for the
complete USB keyboard legacy support for
non-USB aware OSes.
USB Transfer
time-out
The time-out value (1 / 5 10 / 20 secs) for Control,
Bulk, and Interrupt transfers.
Device reset time-out
Gives seconds (10 / 20 / 30 / 40 secs) to delay
execution of Start Unit command to USB mass
storage device.
Device power-up
delay
Max.time the device will take before it properly
reports itself to the Host Controller. ‘
Auto
’ uses
default value: for a Root port it is 100ms, for a
Hub port the delay is taken from Hub descriptor.
Summary of Contents for IB919 Series
