![background image](http://html1.mh-extra.com/html/ibase-technology/ib919-series/ib919-series_user-manual_3244642053.webp)
BIOS Setup
IB919 Series User’s Manual
45
4
4.4.1
Connectivity Configuration
BIOS Setting
Description
CNVI Mode
This option configures Connectivity.
Auto Detection
– means that if Discrete solution is
discovered it will be enabled by default. Otherwise
Integrated solution (CNVi) will be enabled;
Disable Integrated
– disables Integrated Solution.
MfUart1 type
This is a test option which allows configuration of
UART type for WiFI side band communication.
Options are ISH Uart0 / SerialIO Uart2 / Uart over
external pads / Not connected.
Discrete Bluetooth
Module
Seiral IO UART0 needs to be enabled to select BT
Module.
Default: Disabled
Advanced
Settings
Configure ACPI objects for wireless devices
Default: Disabled
WWAN
Configuration
Configure WWAN related options.
WWAN Device: enable or disable M.2 WWAN device
WWAN Reset
Workaround
Default: Enabled
Summary of Contents for IB919 Series
