![background image](http://html1.mh-extra.com/html/ibase-technology/ib908f/ib908f_user-manual_3252910048.webp)
DRIVERS INSTALLATION
IB908F
User’s Manual
43
Primary PEG
Select PEGO/PEG1/PEG2/PEG3 Graphics device should be Primary
PEG.
Primary PCIE
Select PCIE0/PCIE1/PCIE2/PCIE3/PCIE4/PCIE5/PCIE6PCIE7
Graphics device should be primary PCIE.
Internal Graphics
Keep IGD enabled based on the setup options.
DVMT Pre-Allocated
Select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used by
the internal graphics device.
DVMT Total Gfx Mem
Select DVMT 5.0 total graphics memory size used by the internal
graphics device.
LCD Control
Select the Video Device that will be activated during POST. This has no
effect if external graphics present. Secondary booty display selection will
appear based on your selection. VGA modes will be supported only on
primary display.
Summary of Contents for IB908F
