BIOS SETUP
IB730 User’s Manual
41
Power Management Setup
The Power Management Setup allows you to save energy of your system
effectively. It will shut down the hard disk and turn off video display after
a period of inactivity.
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management
: User Define
** Reload Global Timer Events **
PM Control by APM
: Yes
IRQ3 (3-7, 9-15), NMI
: Disabled
Video Off Method
: V/H SYNC +Blank Primary IDE 0
: Disabled
Video Off After
: Standby
Primary IDE 1
: Disabled
MODEM Use IRQ
: 3
Secondary IDE 0
: Disabled
Doze Mode
: Disabled
Secondary IDE 1
: Disabled
Standby Mode
: Disabled
Floppy Disk
: Disabled
Suspend Mode
: Disabled
Serial Port
: Enabled
HDD Power Down
: Disabled
Parallel Port
: Disabled
Throttle Duty Cycle
: 62.5%
PCI/VGA Active Monitor
: Disabled
Soft-Off by PWR-BTTN
: Instant-Off
Power On by Modem/LAN : Disabled
Resume by Alarm
: Disabled
IRQ 8 Break Suspend
: Disabled
ESC : Quit
á
â
à
ß
: Select Item
F1 : Help
PU/PD/+/- : Modify
F5 : Old Values
(Shift) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Power Management
This field allows you to select the type of power saving management
modes. There are four selections for Power Management.
Min. Power Saving
Minimum power management
Max. Power Saving
Maximum power management.
User Define
Each of the ranges is from 1 min. to 1hr.
Except for HDD Power Down which
ranges from 1 min. to 15 min.
(Default)
NOTE
:
In order to enable the CPU overheat protection feature, the
Power Management field should not be set to Disabled.