![background image](http://html1.mh-extra.com/html/ibase-technology/ib530f-series/ib530f-series_user-manual_3234422034.webp)
BIOS SETUP
30
IB530F User’s Manual
Onboard LAN Boot ROM
This feature allows users to enable or disable the onboard LAN boot
ROM. The default setting is
Disabled
Onboard FDC Controller
Select
Enabled
if your system has a floppy disk controller (FDC)
installed on the motherboard and you wish to use it. If you install an
add-in FDC or the system has no floppy drive, select Disabled in this
field. This option allows you to select the onboard FDD port.
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and
their addresses. The default values for these ports are:
Serial Port 1
3F8/IRQ4
Serial Port 2
2F8/IRQ3
Parallel
Port
378H/IRQ7
UART Mode Select
This field determines the UART 2 mode in your computer. The default
value is
Normal
. Other options include
IrDA
and
ASKIR
.
Parallel Port Mode
This field allows you to determine parallel port mode function.
SPP
Standard Printer Port
EPP
Enhanced Parallel Port
ECP
Extended Capabilities Port
Summary of Contents for IB530F Series
Page 1: ...IB530F IB530 Series AMD Geode LX 3 5 inch Disk Size SBC USER S MANUAL Version 1 0A...
Page 4: ...iv IB530F User s Manual This page is intentionally left blank...
Page 8: ...INTRODUCTION Board Dimensions 4 IB530F User s Manual...
Page 56: ...APPENDIX 52 IB530F User s Manual This page is intentionally left blank...