IBASE Technology FWA8600 User Manual Download Page 64

Page: 64 / 112

FWA8600 User Manual

3.6.3.1.

UPI General Configuration

BIOS Setting

Description

UPI Status

UPI status help.

Degrade Precedence

Choose Topology Precedence to degrade
features if system options are in conflict or
chooses Feature Precedence to degrade
topology if system options are in conflict.

Link Speed Mode

Select the UPI link speed as either the PDR
speed (Fast) or default speed (Slow).
Options: Slow, Fast

Link Frequency Select

Allows for selecting the UPI link frequency.
Options: 9.6 GB/s, 10.4 GB/s, Auto, User Per
Link Setting

Link L0p / L1 Enable

Enable the function to set as the C_10p_en.
Disable the function to reset it.
“Auto” decides based on S1 Compatibility.

UPI Failover Support

Enable the function to set as the c_fallover_en.
Disable the function to reset it.
“Auto” decides based on S1 Compatibility.

Summary of Contents for FWA8600

















































































































Search results

Summary of Contents for FWA8600

Reviews:

Related manuals for FWA8600

Brands by name

Popular brands

IBASE Technology FWA8600, User Manual

Search results

Summary of Contents for FWA8600

Reviews:

Related manuals for FWA8600

Brands by name

Popular brands