IBASE Technology FWA8600 User Manual Download Page 40

Page: 40 / 112

FWA8600 User Manual

3.4.1

Trusted Computing

BIOS Setting

Description

Security Device Support

Enables / Disables BIOS support for security
device. The operating system will not show the
security device. TCG EFI protocol and INT1A
interface will not be available.

SHA-1 PCR Bank

Enables / Disables SHA-1 PCR Bank.

SHA256 PCR Bank

Enables / Disables SHA256 PCR Bank

Pending Operation

Schedule an operation for the security device.

Note: Your computer will reboot during restart
in order to change state of security device.

Options: None, TPM Clear

Platform Hierarchy

Enables / Disables Platform Hierarchy.

Storage Hierarchy

Enables / Disables Storage Hierarchy.

Endorsement Hierarchy

Enables / Disables Endorsement Hierarchy.

TPM 2.0 UEFI Spec
Version

Select the TCG2, the new TCG2 protocol.

Summary of Contents for FWA8600

















































































































Search results

Summary of Contents for FWA8600

Reviews:

Related manuals for FWA8600

Brands by name

Popular brands

IBASE Technology FWA8600, User Manual

Search results

Summary of Contents for FWA8600

Reviews:

Related manuals for FWA8600

Brands by name

Popular brands