IBASE Technology FWA8506, User Manual

Page: 31 / 69

24 FWA8506 User Manual
•
Power LED (Pins 1, and 5)
This connector connects to the system power LED on control panel. This
LED will light when the system turns on.
Pin Assignment Pin Assignment
1 +5V 5 Ground
•
ATX Power ON Switch (Pins 13 and 14)
The 2 pins make an “ATX Power Supply On/Off Switch” for the system
that connects to the power switch on the case. When pressed, the power
switch will force the system to power on. When pressed again, it will
power off the system.
Pin Assignment Pin Assignment
13 Power_ON 14 Ground
•
Reset Switch (Pins 17 and 18)
The reset switch allows you to reset the system without turning the main
power switch off and then on again. Orientation is not required when
making a connection to this header.
Pin Assignment Pin Assignment
17 SYSRST# 18 Ground
•
Hard Disk Drive LED Connector (Pins 19 and 20)
This connector connects to the hard drive activity LED on control panel.
This LED will flash when the HDD is being accessed.
Pin Assignment Pin Assignment
19 +3.3V 20 -HDD_LED
•
Bypass LED1 (Pins 9 and 10)
The two pins make an external LED connector light for LAN bypass.
Pin Assignment Pin Assignment
9 +5V 10 BYPASS0_LED-
•
Bypass LED2 (Pins 11 and 12)
The two pins make an external LED connector light for LAN bypass.
Pin Assignment Pin Assignment
11 +5V 12 BYPASS1_LED-