IBASE Technology FWA8506, User Manual

Page: 18 / 69

Hardware Configuration
FWA8506 User Manual 11
2
2.1.1 Memory Installation / Replacement
If you need to install or replace a memory module, follow the instructions
below after you have removed the device cover.
1. Locate the memory slots in the device.
2. Press the ejector tab of the memory slot down and outwards with your
fingertips.
3. Hold the memory module and align the key of the module with that on the
memory slot.
4. Gently push the module in an upright position until the ejector tabs of the
memory slot close to hold the module in place when the module touches
the bottom of the slot.
To remove the module, press the ejector tabs outwards with your fingertips to
eject the module.