IBASE Technology FWA8408, User Manual

Page: 48 / 75

BIOS Setup
FWA8408 & FWA8406 User Manual 41
4
BIOS Setting Description
Therminal Type Sets the terminal type as VT100, VT100+, VT-UTF8,
or ANSI.
Bits per second Selects serial port transmission speed. The speed
msut be matched on the other side. Long or noisy
lines may require lower speeds.
Options: 9600 19200, 38400, 57600, 115200
Data Bits Options: 7, 8
Parity A parity bit can be sent with the data bits to detect
some transmission errors.
Options: None, Even, Odd, Mark, Space
Stop Bits Stop bits indicate the end of a serial data packet. (A
start bit indicates the beginning.) The standard
setting is 1 stop bit.
Options: 1, 2
Flow Control Flow control can prevent data loss from buffer
overflow. When sending data, if the receiving buffers
are full, a “stop” signal can be sent to stop the data
flow.
Options: None, Hardware RTS/CTS
VT-UTFB Combo
Key Support Enables / Disables VT-UTFB combination key
support for ANSI/VT100 terminals.
Recorder Mode Enabling this mode allows only text to be sent. This
is to capture terminal data.
Resolution 100x31 Enables / Disables extended terminal resolution.
Putty Keypad Selects function eky and keypad on Putty.
Options: VT100, Linux, XTERMR6, SC0, ESCN,
VT400