IBASE Technology ASB200-953, User Manual

Page: 23 / 91

Hardware Configuration
ASB200-953 User Manual
15
2
3. Locate the M.2 card slot. Align the key of the m.2 card to the m.2 interface,
and insert the card slantwise.
4. Push the m.2 card down, and fix it onto the standoff with a screw.
2.1.3 Memory Installation
If you need to install or replace a memory module, perform the following
steps:
1. Locate the memory slot on the board.
2. Align the key of the memory module with that on the memory slot and
insert the module slantwise.
3. Gently push the module down in an upright position until the clips of the
slot close to hold the module in place when the module touches the
bottom of the slot.
To remove the module, press the clips outwards with both hands, and the
module will pop-up.