IBASE Technology AMS300, User Manual

Page: 26 / 92

18 AMS300 / 301 / 302 User Manual
AMS302: Release 2 screws on the lower front side of the device and 3
screws on the bottom.
2.1.1 Memory Installation / Replacement
If you need to install or replace a memory module, follow the instructions
below for installation after you disassemble the device cover.
1. Locate the memory slots in your device.
2. Press the ejector tab of the memory slot outwards with your fingertips.
3. Hold the memory module and align the key of the module with that on the
memory slot.
4. Gently push the module in an upright position until the ejector tabs of the
memory slot close to hold the module in place when the module touches
the bottom of the slot.
To remove the module, press the ejector tabs outwards with your fingertips to
eject the module.