Once enable SSID CPE will broadcast its name. Select SSID blank you can change its
name here.
Broadcast SSID:
Enable the option, SSID will be visible you can see the BSSID
name by PC or laptop’s wireless scan tools, once you disable it user couldn’t find the
SSID by scanning tools, the SSID has been hided, but if you still wish to connect with
the SSID, just enter the SSID manually.
Security Mode:
In this option you can configure encryption mode, key etc…security
mode currently support Open WEP, WPA-PSK, WPA2-PSK.
Security Type:
Suggest security type to be TKIP mode which is better encryption type.
4.4 AP Client:
In this mode, the device associate with nearby AP and checks the network device combination as
required. The access point then forms a wireless bridge between the wired LAN and clients through
the device. CPE broadcasting its SSID, client devices obtain IP address from uplink hotspot or WISP.
Connects to wireless AP or WLAN base station
Check “
Operation Mode
”→select ”
AP Client
”→click ”
Scan
”→select specified
SSID
you wish to connect with,
then fill-
in password →Click “
Apply
” to save settings
Channel without setting, since Channel of the CPE will automatically consistent with the front end WLAN base
station in AP and AP Client mode.
