iB-WUA300N
300M Wireless-N USB Adapter
15
•
Certificate -
Select the certificate you apply.
1. Open System authentication
When you select the
Open System
as the authentication, the
Disabled
and
WEP
can be
available for the data encryption. If you select
Disabled
, you don’t need to configure any
passwords. If you select
WEP
, you can configure the password as follows.
For example:
If the wireless network takes
Open System
authentication,
WEP
data encryption,
the password is 64bit with the value of 0123456789. The index is 1.
Figure 3-4
Step 1:
Select the “Open System” as the Network Authentication.
Step 2:
Select the “WEP” as Data encryption.
Step 3:
Select the type for the password and you can select the ASCII or Network Key. For
ASCII, you can enter any characters in the keyboard; For Network Key, you can enter
the characters from 0 to 9.
Step 4:
Select the Key index “1”.
Step 5:
Enter “0123456789” as the Network key.
Step 6:
Enter it again to confirm the Network Key and click the
OK
to save the configuration.
2. Shared
Key
authentication
When you select the
Shared Key
as the authentication, the only available data encryption is
WEP.
)
Note:
The configuration for Shared Key authentication and Open System are similar, you can refer to
the Open System authentication to configure it.
