iB-WUA300N
300M Wireless-N USB Adapter
14
¾
Network Name (SSID) -
Please enter the IEEE 802.11 wireless network name. This field has
a maximum limit of 32 characters.
)
Note:
The
Profile Name
and
Network Name
are necessary for the profile, you must configure it.
¾
Channel -
If you want to setup an ad-hoc, select the option “This is a computer-to-computer
(ad-hoc) network; wireless access points are not used.” If you don't select the option, the
system will search the available channel to connect.
¾
Wireless network security -
This configure the security for the adapter.
)
Note:
You should configure the security for the adapter according with the wireless network that you
want to connect. If the wireless network takes some security measure, you should configure the
same security for the adapter accordingly. If the wireless network doesn’t take security measure,
you don’t need to configure the security for the adapter.
•
Network Authentication -
Select which mode the Wireless N USB Adapter uses to
authenticate to an access point. These modes are: Open System, Shared key,
WPA-PSK, WPA2-PSK, WPA 802.1X, WPA2 802.1X, and WEP 802.1X.
•
Data encryption -
Select the corresponding data encryption for the authentication.
These encryptions are: Disabled, WEP, TKIP and AES.
)
Note:
1) Select different
authentications
and
data encryptions
, the security configuration is
different.
2) When you select channel manually, the available network authentication are Open
System, Shared key and WPA-None.
3) The RTWCU does not support WPA 802.1x authentication in Windows Vista, while the
Windows Zero Config Tools may satisfy your need.
•
ASCII -
Select this option, you can enter any ASCII characters to compose the
password.
•
Key Index -
Select the index of the password.
•
Network Key & Confirm network key -
The fields configure the network key. The two
should be the same.
¾
802.1x configure -
This configures the 802.1x security, it is available when you select the
data encryption as WPA 802.1X, WPA2 802.1X or WEP 802.1X.
•
EAP TYPE -
Select the EAP type for the 802.1x configuration, the options are: GTC, TLS,
LEAP, TTLS, PEAP.
•
Tunnel -
Select the tunnel: MD5, GTC, TLS, and MSCHAP-V2. The option is necessary
for the EAP type of TTLS and PEAP.
•
Username -
Enter the username for authentication. The option is necessary for the EAP
type of TTLS and PEAP.
•
Identity -
Enter the identity for the authentication.
•
Password -
Enter the password for the authentication. The option is necessary for the
EAP type of LEAP, TTLS and PEAP.
