150M Wireless-N Broadband Router
(iB-WRB150N)
46
you want your friends to access this FTP server through default port 21
and TCP protocol, then you can follow the steps below for configurations.
1. Enter 21 for both the start and end port in ID 1, or select "FTP" from
“Well-Known Service Port” and port 21 will be added automatically to ID 1.
2. Enter 192.168.1.10 for the "IP Address", select "TCP" and then
select "Enable'.
3. The screenshot below displays the above settings.
4. Click "OK".
Now, your friends only need to enter ftp://xxx.xxx.xxx.xxx:21 in their
browsers to access your FTP server. xxx.xxx.xxx.xxx is the device's WAN
IP address. For example, if it is 172.16.102.89, then your friends only need
to enter "ftp://172.16.102.89: 21" in their browsers.
Note:
If you include port 80 on this section, you must set the port on remote
(web-based) management section to a different number than 80, such as 8080,
otherwise the virtual server feature may not take effect.
