iB-WRA300N
300M Wireless-N ADSL2+ Router User Guide
56
Figure
4-40
¾
Rule Type:
Select MAC for the MAC Filter rule.
¾
Active:
Select “Yes” to make the rule to take effect.
¾
MAC Address:
Enter the MAC address for the rule.
¾
Rule Unmatched:
If the current rule can not match, and you select
Forward
, the router will
skip the rule and transmit directly.
If you select
Next
, the router will find the next filter rule
(show in Filter list) to match.
¾
IP/MAC Filter Listing:
This displays the information about the MAC Filter rules.
To add a MAC Address filtering entry:
For example:
If you want to block the PCs with MAC addresses 00-0A-EB-00-07-BE and
00-0A-EB-00-07-5F to access the Internet, you can configure as follows. Presume the rules are
both aimed at the interface PVC0, and their indexes are (1, 1) and (1, 2).
Step 1:
Select the “IP/MAC Filter” as the Filter Type Selection:
Select the “MAC” as the Rule Type on the Filter screen (show in Figure
4-40).
, Then you can configure the specific rule for the example.
