iB-WRA150N
150M Wireless-N ADSL2+ Router - User Guide
If you select the protocol of PPP over ATM (PPPoA), you will see the Figure 4-11.
Figure 4-11
PPP Username
: Enter your username for your PPPoA connection to identify and verify your
account to the ISP.
PPP Password
: Enter your password for your PPPoA connection.
Authentication Method
: Choose a method of authentication, AUTO, PAP, CHAP, or
MSCHAP.
MTU
: The default MTU value is 1480 Bytes. It is not recommended that you change the
default value unless required by your ISP. The value should be between 512 and 1492.
Enable Fullcone NAT
: Check this box to enable the Fullcone NAT function. The default value
is disabled.
Dial on demand
: If you check this box, the Internet connection can be terminated
automatically after a specified inactivity period (Inactivity Timeout) and be re-established
when you attempt to access the Internet again. The default value of Inactivity Timeout is 15.
The value should be between 1 and 4320.
PPP IP extension
: If this box is checked, the IP address obtained by the Router will be
assigned to the computer, and the NAT and Firewall will be disabled.
24
