The specifications are subject to change without notice. 12 of 16
English
Model: GT700 Version: 1.0
book name for about 60~80 seconds when the SYS LED (blue) turns on. If there is no data
on SIM card, the lights of GPS, SYS & Power LED will flash simultaneously.
If so, presses and holds the “SOS” button for few seconds until all lights of GPS, SYS &
Power LED dying out. Then the GT700 will generate the phone book name of T1, T2, T3
and INTERVAL (as below list) which parameter is default setting.
5. To modify phone book
To modify the contents of the phone book of SIM card, please contact to your service
provider.
(To avoiding GT700 can not use abroad, add the country code when modify the phone
number.)
6. Phone Book specification
The phone book name table as:
Phone Book Name
Function
T1
Pressing the button to call the user of T1
, default is 9999
T2
Pressing the button to call the user of T2
, default is 9999
T3
Pressing the button to call the user of T3
, default is 9999
INTERVAL
Setting regular report, default is 0000, setting for a unit of second.
7. To set Geo-Fence Notification
All of T1~T3 users can set the function via the service provider’s platform. The service
provider will send commands to the GT700 via GPRS when user notices. If the setting was
successful the GT700 will send the ack message to setting user and the user can check
correct or not through the map.
8. Report rate setting
The phone book name is
INTERVAL
, default is 0000, setting for a unit of a second. The
minimum is 0180 if through GPRS transmission
.
Default is closed. The GT700 will not
enter the saving mode if the setting time is less than 10mimutes.
9. Powered on/saving mode/wake-up mode
