Manual
ibaBM-DP
46
Issue 1.7
Note
Ask your network administrator for an IP address suitable for your network.
The following IP addresses are not permitted:
0.0.0.0, broadcast: 255.255.255.255 and Localhost-addresses (also known as loopback
addresses): 127.0.0.0 to 127.255.255.255 and the Multicast addresses 224.0.0.0 to
239.255.255.255 (224.0.0.0/4).
For the IP address, the "standard IPv4 dotted-decimal format“ without a leading zero is
used. If you have entered any leading zeros, they will be automatically eliminated as soon
the IP address is being accepted.
Tip
In case of wrong entries, you might not have access again after a restart!
You can reset the network parameters to the default settings. For further information,
please see chapter 7.3.3
9.3.4
Settings
This page can only be accessed by the "admin" user. Depending on the selected mode,
current device settings are displayed on this page.
Fig. 21: Web interface current settings
When compatibility mode 3Mbit, P2P mode or mapping mode are selected, further detail
settings must be done here.
