Manual
ibaMS8xAI-110VAC
22
Issue 1.4.1
Cutoff frequency
You can enter a value in Hz or you can set it to „Auto“. When it is set to “Auto” the
cutoff frequency is equal to one third of the sampling frequency.
Permissible values: 100 Hz … 0,5*sampling rate
The entry “0” Hz corresponds to the setting “Auto”.
Enable frequency measurement
Select „TRUE“, if you want to measure grid frequency of the connected signals. The
„Grid frequency [10Hz..80Hz]“ tab appears additionally.
9.1.2
“Analog” tab
The following settings apply to the “Analog” tab:
Figure 11: I/O Manager ibaMS8xAI-110VAC – Analog tab
Name
You can enter a name for the signal and two additional comments (click on the
icon in the Name field).
