ibaDAQ
Manual
Issue 1.1
27
8.4
Connection to networks
ibaDAQ can be operated in two different networks to separate for example the network
for measuring data transmission from the rest of the network. For this prupose the device
provides 2 Ethernet interfaces. For setting the addresses in the networks, please refer
to chapter 7.3.2.
Figure 17: Connected to 2 different networks
8.5
Connection with USB-WLAN/RJ45 adapter
Another possible configuration to operate ibaDAQ in 2 different networks, is the use of
an USB-WLAN or USB-RJ45 adapter at the USB interface. There is no need for a special
adapter type. Any commercial adapter that supports Windows 10 or higher can be used
for this purpose. However, the corresponding drivers need to be installed on the device.
Figure18: USB Ethernet adapter
8.6
Operation with compact UPS
In order to secure an optimal operation, it is recommended to buffer the power supply of
the ibaDAQ system via an uninterruptible power supply (UPS) with additional digital out-
put. For this purpose, the digital output of the UPS serves as signal for securely shutting
down the ibaDAQ operating system.
Figure 19: Operation with UPS