EN
TECHNICAL DATA
Minimum dynamic pressure:_________________________________________________________0.5 bar
Maximum operational pressure:________________________________________________________5 bar
Recommended operational pressure:_________________________________________________1-5 bar
It’s recommended to use a pressure reducer in case of
static pressure superior than 5 bar inside the waterpipe.
Maximum hot water temperature:_______________________________________________________80°C
INSTALLATION, MAINTENANCE AND PRELIMINARY CHECKING PROCEDURE
In
order to get your device work correctly and fi ne in time, must ensure compliance with the
mode of installation and maintenance described in this booklet. Relying on a qualifi ed plumber.
Make sure that the system is free from all debris and impurities existing.
INSTALLATION
Fig. 1:
Unscrew the fl ange.
Fig. 2:
Insert the fi nishing rosettes on the pipes, screw the fl ange back until they are completed
locked.
Fig. 3:
Prepare the fl oor hydric system supply with two pipes with G1/2’’ male thread. From the
fi nished fl oor they must protrude maximum 12 mm - 15/32 in. With a wheelbase of 270 mm -
105/8 in. The hole in the fl oor should be Ø40 mm - Ø1 37/64 in.
Fig. 4:
Position the mixer body to take the references for the position of the fi xing plugs. Drill 4
holes Ø12 for each leg.
Fig. 5:
Place the gasket inside the hose, screw the hoses to the water supply.
After connecting the body to the system, turn on the stopcocks and check that the mixer tap
unit operates correctly. Keep the tap pressurised for a few minutes checking eventual leaks.
Fig. 6:
Insert the plugs into the holes and screw the screw onto the fl ange until it is completely
fi xed.
Fig. 7:
Place the spout perpendicular to the body. Screw the grain until it is completely blocked.
Fig. 8:
Screw the hose to the diverter and to the hand shower.
CLEANING
In order to obtain a correct cleanliness, exclusively wash them with soap and water, rewash and
dry them with a soft towel and deerskin. Avoid the usage of alcohol, solvents, solid or liquid
detergents which contain corrosive or acidic substances, abrasive sponges, swab with metallic
strings because they could irreversibly compromise the surfaces.
THE USAGE OF THIS KIND OF DETERGNETS DURING THE CLEANING OF THE MIXER EXCLUDE
IB RUBINETTERIE FROM ANY WARRANTY OBLIGATION.
Summary of Contents for BOLD 700
