![background image](http://html1.mh-extra.com/html/iarp/delight-lite-series/delight-lite-series_use-and-maintenance_3212424018.webp)
-19-
15.
DISPENSER WASH ASSEMBLY (Optional)
To assemble the dispenser wash, proceed as follows:
Screw in the dispenser wash support (
A
) with the dispenser wash
(
B
) using the screw (
C
) on the back of the equipment.
With water recirculation:
•
Fasten the water filling joint (
3
) with the incorporated
valve, positioned as in the illustration, to the tank (
2
)
using the fastening nut (
4
);
•
Connect the stainless steel “overflow” tube (
7
) to the
bushing (
6
) and fasten it to the tank with the nut (
5
);
•
Connect the water filling joint (
3
) to the rubber tube to a
tap and fill the tank (
2
) of clean water;
•
Connect the rubber tube to the bushing (
6
) and drain the
excess water or dirt (filtered from the cover/partition (
8
))
into a sink.
Without water recirculation:
•
Fasten the water filling joint (3) with the valve, positioned
as in the illustration, to the tank (2) using the fastening
nut (4);
•
Connect the stainless steel “overflow” tube (7) to the
bushing (6) and fasten it to the tank with the nut (5);
•
Connect the rubber tube to the bushing (6) and drain the
excess water or dirt (filtered from the cover/partition (8))
into a sink.
•
Manually fill the tank with clean water.
A
B
C