2
iArmor
®
Customer Support: [email protected]
Rev. 20200801
The instruction here is for your reference only. We
strongly recommend the professional installer for best
result. We are not responsible for any damage caused by
the installation
.
STEP 1
Install the Step Pads onto the step bars with (32) M6X1-20 T-
Bolts, (32) M6 Flat Washers, (32) M6 Nylon Lock Nuts and (8)
M6X1-20 Flat Sunk Head Bolts.
IMPORTANT:
Don’t hit the step pad by any metal hummer
within step pad installation, or the step pad will be damaged.
(8) M6X1-20 T-Bolts
(8) M6 Flat Washers
(8) M6 Nylon Lock Nuts
(2) M6X1-20 Flat Sunk Head
Bolts
STEP 2
Front
(Fig 1) 09-mid 15 Driver Side Front Mounting Location (No
factory holes in pinch weld on some models)
Starting at the Driver Side Front of the vehicle, remove the
sealing tape covering the factory holes in the side of the inner
panel,
(Fig 1)
.
Note: All Mounting Brackets and Support-
ing Brackets for Driver Side are the same.
M6 Large Flat
Washer
X68
M6X1-20 T-
Bolt
X44
M6X1
-20 Flat
Sunk Head Bolt
X8
M8 Bolt/Nut Plate
X6
Plastic Washer
X6
M8X
1.25-30
Hex Bolt
X12
M8 Flat Washer
X18
M8 Lock Washer
X6
M6X1-25 Hex
Bolt
X12
M8X1.25 Nylon
Lock Nut
X6
M6X1 Nylon
Lock Nut
X56
