4
iArmor
®
Customer Support: [email protected]
Rev. 20200401
STEP 6
Install the Assembled Passenger Center Mounting Bracket on
the vehicle, (Fig 7).
STEP 8
Install the Assembled Passenger Rear Mounting Bracket on
the vehicle, (Fig 9).
STEP 7
Assemble the Passenger Side Rear Mounting Bracket (PRM)
and Passenger side Rear Support Bracket (PRS) and Passen-
ger Rear Support Plate (PRS1), ( Fig 8). Don’t tighten hard-
ware.
STEP 9
Once all (3) brackets are installed, attach the Assembled Pas-
senger Side Step Bar onto the Brackets, (Fig 10).
(1) M8X1.25-35 Hex Bolt
(1) M8 Lock Washer
(1) M8 Flat Washer
(
Fig 7) Passenger Side Center Bracket
Installed
(2)M6X1-25 Hex Bolts
(4)M6 Flat Washers
(2)M6 Nylon Lock Nuts
PRM
PRS1
(Fig 8) Passenger Rear
Mounting Bracket
Assembly
(2) M8X1.25-25 Hex Bolt
(4) M8 Flat Washers
(2) M8 Lock Washer
(2) M8X1.25 Hex Nut
PRS
(1) M8X1.25-35 Hex Bolt
(1) M8 Lock Washer
(1) M8 Flat Washer
(2) M6X1-25 Hex Bolts
(4) M6 Flat Washers
(2) M6 Nylon Lock Nuts
(Fig 9) Passenger Side Rear Bracket Installed
PCM
PCB
PCS
(Fig 6) Passenger Side Cen-
ter Mounting Bracket
Assembly
(2) M8X1.25-20 Inner
Hex Bolts
(2) M8X1.25 Hex Flange Nuts
(1) M8X1.25-25 Hex Bolt
(2) M8 Flat Washers
(1) M8 Lock Washer
(1) M8X1.25 Hex Nut