2
iArmor
®
Customer Support: [email protected]
Rev. 20200401
The instruction here is for your reference only. We
strongly recommend the professional installer for best
result. We are not responsible for any damage caused by
the installation
.
STEP 1
Install the Step Pads onto the step bars with (32) M6X1-20 T-
Bolts, (32) M6 Flat Washers, (32) M6X1 Nylon Lock Nuts and
(8) M6X1-20 Flat Sunk Head Bolts.
(8) M6X1-20 T-Bolts
(8) M6 Flat Washers
(8) M6 Nylon Lock Nuts
(2) M6X1-20 Flat Sunk Head
Bolts
STEP 2
Start installation on the passenger side of the vehicle. The
mounting brackets locations as shown on (Fig 1-3) Attach
brackets onto the holes in the pinch weld and the small factory
threaded hole directly behind the pinch weld.
Front
Front
(
Fig 1) Passenger Side Front Mounting
Location
Pair of holes on pinch weld
Threaded hole on
floor panel
M6X1-20
T-Bolt
M6 Flat
Washer
M6 Nylon
Lock Nut
M6X1-20 Flat
Sunk Bolt
X 40
X 70
X 58
X 8
M8X1.25-35
Hex Bolt
M8X1.25-25
Hex Bolt
M8 Large
Flat Washer
M6X1-20
Square Head
Bolt
M8X1.25 Hex
Flange Nut
M8X1.25-20
Inner Hex Bolt
M8 Lock
Washer
M8X1.25
Hex Nut
M6X1-25
Hex Bolt
X 4
X 6
X 4
X 14
X 4
X 8
X 22
X 8
X 12