5
Rev. 20221201
iArmor
®
Customer Support: [email protected]
STEP 7
Level and adjust the assembled Step Bar properly and tighten
all hardware.
Move to the other side of the vehicle. Repeat
Steps 2-6
for the
other Side Step Bar installation.
Attention
Do periodic inspections to the installation to make sure
that all hardware is secure and tight.
In order to protect your bars/boards, please use mild
soap/non-abrasive products for cleaning only.
(Fig 7) Passenger Side Step Bar Installation
Front
(4) M8 Plastic Washers
(4) M8X1.25-20mm T-Bolts
(4) M8 Large Flat Washers
(4) M8 Nylon Lock Nuts
Bottom View
(2) M6X1-20mm Square Head Bolts
(2) M6 Large Flat Washers
(2) M6 Nylon Lock Nuts
(Fig 8) M6 Square
Bolt in the Channel
