- 28 -
ave & Exit Setup
S
ress <Enter> on th
P
is item to save your changes. The system will ask for confirmation : system
ressing "Y" stores the sele ons made in the menus of CMOS - a special section of memory that stays on
The next time you boot your computer, the BIOS configures your system
accordin to the Setup selections stored in CMOS. After saving th
lues the system will restart.
Save to CMOS and EXIT (Y/N)? Y
P
cti
after you turn your system off.
g
e va
Exit Without Saving
Press < nter> on this item to exit without saving changes. The sy tem will ask for confirmation:
without storing in CMOS any change. The previous selections remain in
Tips and Safety precautions
E
s
Quit without saving (Y/N)? Y
This allo
you to exit from Setup
ws
effect. This exits from the Setup utility and restarts your computer.
For your safety and the safety of your equipment, please read and observe the following rules, as well as
the guidelines for working more comfortably.
Location and installation
•
Set down the XPc carefully on a flat and stable work surface. The XPc can cause injury by falling as a
result of placing on top of unstable objects or in unsafe places.
•
Do not use the XPc where the ventilation is poor, or there’s a lot of dust, where humidity is high, or
where the XPc may come into contact with oil or steam
and do not place the XPc where the power cord
is subject to damage.
•
The vents and other openings in the cabinet are designed for ventilation. Do no cover these vents and
openings since insufficient ventilation can cause overheating and/or shorten the life of the XPc Do not
place the XPc on a bed, sofa, rug, or other similar
or in an enclosed space since they can
her fluids and protect your computer
weather, such as rain, snow. Ensure that no objects such as paper clips or pins
Causing the XPc to fall or
rature, as this may lead to generation of
devices or anything with strong magnetic fields such as radios, fans, clocks and
.
surface,
block the ventilation openings.
Ensure that the XPc does not come into contact with water or ot
•
from dampness or wet
enter the XPc as this could lead to fire or electric shock.
come into contact with strong shocks or vibrations.
•
Do not allow the XPc to
topple over may damage it.
•
Do not place any heavy objects on the XPc. This may cause an electric shock or a fire.
•
Do not use in places where the XPc will be subject to direct sunlight, near heating equipment or
anywhere else where there is likelihood of high tempe
re.
excessive heat and outbreak of fi
•
Remove all electronic
telephones that are within 3 feet (one meter) of the XPc.
