EXHAUST GAS TEMPERATURE PROBE
The muffler, supplied with the engine is provided with a temperature probe fitting
which is not drilled.
Whenever you wish to employ the probe, please proceed as shown in the figure
below.
EXHAUST LENGTH SETTING
The following table shows the exhaust length setting (distance “X” between
exhaust plane on the cylinder and end of first sector of muffler) depending on the
track conditions and needed power diagram:
X (mm)
DESCRIPTION
FINAL REPORT WHEEL/SPROCKET
100≤X≤104
STANDARD SERIES
STANDARD RATIO
96≤X≤100
-4mm FROM SERIES
FROM STANDARD TO ½ TOOTH MORE ON
REAR SPROCKET
X<96
-9mm FROM SERIES
FROM ½ TOOTH MORE, TO 1 TOOTH MORE
ON REAR SPROCKET
drill exhaust Ø4.2 for cylindrical probe
drill exhaust Ø4.2 and thread M5 for threaded probe
5
