iAIRE ultraDRY Series, Manual

Page: 10 / 38

TROUBLESHOOTING
1. The unit does not come on.
a. Check to make sure there is power to the unit.
b. Check to make sure the disconnect is on.
c. Check to make sure the jumper between pins on
terminal strip 1 is removed.
i. If other wires are attached to pins, make
sure there is not a short or the unit will not turn on.
This is the location for remote start/stop.
d. Check to make sure the circuit breaker or the 24V
power supply is not tripped.
2. Fan speed is not correct.
a. Go to the thermostat and adjust the fan speed up or
down as required.
3. The unit is tripping out on high heat and requires a manual
reset.
The air speed needs to be raised to prevent the heat from
being too hot in the unit.
10