IAI FS, Operating Manual, Page: 16 / 30

I NTELLIGENT ACTUATOR
6. Installation
6.1 Mounting the actuator
We'll describe the installation process using a single axis unit.
• There is a T-slot at the bottom of the base. Mount the actuator using this T-slot and the T nuts that come with the actuator.
(Please see drawing below).
6.2 Attaching the payload to the slider
• There are M-8 tapped holes in the slider where you can affix the payload.
The mounting procedure is basically the same as for the actuator.
Bottom of base
T-slot shape
6.3 Mounting Surface
• The mounting table should have sufficient rigidity to avoid generating vibration.
• The surface where the actuator will be mounted should be machined or be equally level and the flatness tolerance
between the actuator and the table should be within 0.05mm.
• Provide enough space around the actuator to permit maintenance work to be done.
6
20.2
10.2
28
7
6
0.2
0.2
+-
+-
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com