IAG IOS6WE3, Installation And Operation Manual

Page: 9 / 20

Fig. 4B
Minute minder
Clock
Start of cooking
Cooking time
End of cooking
Defrosting
Turnspit
Key lock
9
INSTRUCTIONS FOR USE OF CONTROL DEVICES (display LCD)
SETTING THE TIME OF DAY
When the oven is first connected to the power supply, the display shows 00.00 and the led indicator
“ ” flashes. To set the desired time, turn the knob (fig. 4B) clockwise to the symbol “ ” or
anticlockwise to the symbol “ ” depending on whether you wish to increase or decrease the time.
To confirm the time set, press the knob or wait for 5 seconds.
Important : unless this operation is performed, it will not be possible to set the oven’s cooking functions.
Note : if you wish to set the time of day later, press the selector knob (fig. 4B) until the time indicator
“ ” flashes and then proceed as described above.
After setting, the timer is set to operate in manual mode.
MINUTE MINDER
Press the selector (fig.4B) until the minute minder indicator “ ” flashes, then set the desired cooking
time by turning the knob clockwise to the symbol “ ” or anticlockwise to the symbol “ ” depending
on whether you wish to increase or decrease the time. To confirm the time set, press the knob or wait
for 5 seconds. The display will show the set time and the indicator “ ” will remain lit. At the end of
the set time, an acoustic signal sounds and the indicator “ ” flashes. Press the selector knob (fig.4B)
to stop the acoustic signal.
COOKING TIME
Important : cooking time can only be set if the cooking function selector knob (fig.4) is turned to a
cooking position!
Bear in mind, furthermore, that is the cooking function selector knob is turned to “ zero ” during a cooking
programme, the entered setting will be cancelled!
Setting : press the selector knob (fig.4B) until the symbol “ ” flashes. Set the desired cooking time
by turning the knob clockwise to the symbol “ ” or anticlockwise to the symbol “ ” depending
on whether you wish to increase or decrease the time. To confirm the set time, press the selector knob
(fig.4B) or wait for five seconds. The display will show the symbol “ ” with the set time and the
symbol “ ” with the time at which the oven will switch off.
Start of cooking is indicated by the symbol “ ”, which lights up on the display. At the end of the
set time the oven switches off automatically, an acoustic signal sounds and the indicator “ ” flashes.
Press the selector knob (fig.4B) to stop the acoustic signal and turn the function selector (fig.4) to
“ zero ” to exit cooking time setting.