IAG IOS6SE3, Installation And Operation Manual

Page: 5 / 20

5
ELECTRICAL CONNECTION
The appliance must be installed by a suitably qualified person in accordance with
these instructions and with the requirements of the Australian Wiring Rules AS/NZS 3000.
Fixed wired installations are to be provided with suitable isolation means in accordance with the said rules.
Any plug socket installed for the purpose of connecting the appliance to supply must be readily accessible
when the appliance is installed.
Before making the connection, make sure that:
1) the safety circuit-breaker and the electrical system are able to withstand the load of the appliance
(see nameplate).
2) the power supply system has an earth connection in good working order in accordance with the regulations
in force;
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
GREEN & YELLOW .....................................................................EARTH
BLUE........................................................................................NEUTRAL
BROWN ...........................................................................................LIVE
Electric power ....................1,5 mm
2
core cable (15 amp. Fuse required)
Should conform to local authority requirements.
Also refer to rangehood manufacturers recommendations.
This appliance is supplied with a plug & cord, simply plug into a 3 pin household socket outlet witch is properly
earthed.
WARNING: THIS APPLIANCE MUST BE EARTHED.
The flexible mains lead and plug must not be in contact with hot surfaces.