Plastic Installation
6
Before fitting the sheet, IAE advise that the mid purlins are pre drilled using a drill screw. Drill
until it starts to thread then remove and clean to remove all swarf. See Fig 11.
·
Pre drill ø10mm holes in sheet first to match purlins.
·
Fix the sheet to the mid purlins using 5.5x32mm drill screws.
Attach the PETg UV to the side and rear panels using 5.5x3.2mm drill screws. Pre-drill
Ø10mm holes in PETg.
Fig 12
Summary of Contents for LONGTON SMOKING SHELTER
Page 10: ...9 Exploded Detail Fig 14...
