IAD-DGS-X32-10EP Revision 1.1
Content Management
Please consult the software documentation for information specific to your
management solution.
Troubleshooting
Why is there no video output on composite video connectors?
The player outputs video over HDMI and VGA by default. To switch to
composite video output, connect a HDMI or VGA display, then select PAL or
NTSC output from the menu system (see System setup).
If both Ethernet & Wi-Fi are available, which connection will take priority?
When Ethernet is not available or disconnected, system will try to use Wi-Fi
connection. If both connections are available, Ethernet will take priority for
data transfer.
How do I remove an inserted CF card?
You can install a CF card to replace the 4GB internal memory. The card slot is
located behind a metal plate (the
CF card cover/remover
). To remove an
inserted CF card, use the
CF card cover/remover’s
metal hooks
to pull out the card.
Reset player to factory defaults
If modifying settings cause unintended results or if you have forgotten your
password, please reset the player. Local contents will also be
removed.
1.
PRESS
and hold
the reset button with a pen
2.
Re-connect the power cord while holding reset button
3.
Wait 12 seconds until the orange status LED flashes
4.
Release reset button and wait 90 seconds for system
to initialize
