background image

23 
 

 

 

 

 

 

 

IAdea Limited Warranty 

For Media Player Devices 

 

Applicable to IAdea product models:  

 

XMP-2200/2300/2400 

 

1.

 

IAdea provides, unless extended through optional service programs, one (1) year of limited warranty on 
its  applicable  product  models  listed  above.  The  applicable  product  must  be  purchased  through  an 
authorized  IAdea  reseller.  Subject  to  the  conditions  of  this  warranty,  IAdea  will  perform  necessary 
service on the product without charge for parts or labor if, in the opinion of IAdea, the product is found 
to be faulty within the warranty period. IAdea’s sole warranty and obligation will be to repair or replace 
(at  it  sole  discretion)  such  products  that  require  warranty  during  the  applicable  warranty  period  in 
accordance  with  these  conditions.  If  the  product  is  found  to  be  in  correct  working  order,  then  IAdea 
reserves the right to charge you for its time and materials costs. 

2.

 

This  warranty  only  applies  if  the  product  has  been  under  normal  use  and  reasonable  care  (in  the 
opinion  of  IAdea).  The  warranty  covers  normal  usage  for  which  the  unit  was  originally  supplied  and 
does  not  cover  damage,  malfunction  or  failure  resulting  from  use  of  incorrect  voltages,  unauthorized 
installation,  accident,  misuse,  neglect,  build-up  of  dirt  or  dust,  abuse,  power  surge  problems, 
thunderstorm  activity,  tampering  or  repair  by  unauthorized  persons  (including  unauthorized 
alterations),  unauthorized  maintenance,  exposure  to  abnormally  corrosive  conditions  or  any  foreign 
object or matter having entered the product. 

3.

 

If warranty service is required you should contact IAdea at 

[email protected]

. You will be required to 

fill out an RMA form and provide proof for your original date of purchase. 

4.

 

You will be responsible for shipping the product to designated IAdea service locations. You are required 
to  pre-pay  for  the  shipping  and  custom  charges,  if  any,  required  for  the  shipment  of  the  product  to 
IAdea.  The  warranties  hereby  conferred  do  not  extend  to  any  costs  associated  with  the  delivery, 
handling, freighting or transportation of the product and do not extend to any damage or loss occurring 
during, or associated with, transit.  

IAdea currently provides warranty service locations in Taipei, Taiwan and Newark, California, USA. 

For questions or further information, please contact 

[email protected]

.  

 

 

Summary of Contents for XMP-2200


























Reviews: