System setup
1
INSTALL the AC power adapter
→
You should see the player boot up screen as
shown in right.
2
WAIT while player boots up
→
Once you see “Basic settings” on screen, the
unit is ready for content update or menu
configuration.
3
PLUG IN a USB mouse to the unit’s USB port or configure by touch
screen (XDS-1078 only).
4
Enter the corresponding configuration option by moving the mouse
cursor over the configuration and click on the option to enter (or tap
on the configuration option for XDS-1078)
→
Find and set the correct time/date AND time zone.
IMPORTANT: time zone must be set correctly in the menu or via
management software for scheduled playback
→
(OPTIONAL) Set a Password in the menus to prevent unauthorized
changes.
IMPORTANT: Password will be asked for when entering the setup
menu during playback.
5
Click Set content button to configure your signage appliance to the
content service if needed
→
For advanced player configuration, such as static IP, display
resolution, and firmware update, visit
www.digisignage.com
for more
information
