IAD_DGS_X7S_20EP
Mounting and Installation
Mounting Option 1: [VESA mount]
Supporting VESA standard: VESA MIS-D75 (75*75mm)
Supporting screw: M4*4mm (exclude the mounting plate thickness)
Mounting Option 2: [Using back cover]
(power / SD card brackets MUST NOT be installed while mount on back cover)
Release the back
cover screw to
release back cover
Install back cover :
thread head height
not to exceed 3mm
Route power and network cable from
bottom, connect to signboard before
mounting signboard on back cover
Insert power plug
Fasten bracket
onto the socket
Insert SD Card
bracket
Fasten the SD
Card bracket
Landscape
Simply screw the supplied table
stand onto the stand screw hole.
Support landscape/portrait setup.
Portrait
Securing power/network cable
Installing the table stand
Mounting options
Securing SD Card
