iadc Solido Inorio Canopy 100860, Operating

Page: 25 / 96

9
To fit the fan module / cooker bonnet, cut a hole in your cabinet measuring 568 x
260MM.
Now remove the grease filter from the cooker bonnet.
Fig. Filter removal Grease filter
There are then two ways of mounting the cooker bonnet. With the first option, you
can mount the cooker bonnet on the "upper side of the wall unit" with four screws.
You can see the dimensions of the screw positions in the picture below.
Fig. Fixing holes for mounting on the "upper side" of the wall unit
Before fixing, make sure that the power cable is not "pinched". After fixing the cooker
bonnet, reinsert the filter in the device provided.