9
WSC Lower Metal Shelf Cabinet to Pedestal Assembly:
Item Description
Qty
1
Lower Metal Shelf 1 Suspended Cab
1
HARDWARE KIT HWR146
A
Bracket, Cab Footrest LMS
1
B
Screw, #14AB x .625 PPH SMS Black 2
C
1/4 Flat Washer
6
D
Bolt 1/4-20 x 1.00 Hex Head Black
2
E
Nut, Unistrut 1/4-20
2
F
Nut, 1/4-20 Hex Keps Black
2
G
Weld Stud 1/4-20 X .75 Right Angle 2
Step 1:
Install the unistrut nuts item E into the pedestal leg assembly channels by first aligning the nut
with the channel, then pushing it into the pedestal cross channel compressing the spring, then
rotate the nut clockwise and releasing it to lock into place. The unistrut nuts can be moved
forward and backward to adjust to location of the lower metal shelf in relationship with the front
edge of the bench.
Step 2:
Install the weld studs item G, 1/4 flat washers item C, and 1/4-20 hex keps nuts item F into the
cabinet footrest LMS bracket as shown below on the right. Do not tighten the hardware. Attach
the bracket assembly to the side of the cabinet using the phillips screws item B and 1/4 flat
washers item C. Be sure the weld studs are positioned so that they will be in the lower slot of the
bracket when the bench is turned over onto it’s pedestals. Tighten the phillips screws.
