10
Step 3:
Place the lower metal shelf between the pedestal leg assembly and the cabinet and rest one end
on the pedestal cross channel. Lower the opposite end of the lower metal shelf so that the slots at
that end can be aligned with the hardware installed in the cabinet footrest LMS bracket. Lift the
lower metal shelf into place and adjust the hardware into the slots and hand tighten so that the
shelf will hang on the hardware. Adjust the lower metal shelf forward or back to the desired
location. Move the unistrut nuts in the pedestal cross channel so that they line up with the slots in
the lower metal shelf and attach it using the 1/4-20 x 1.00 hex head bolts item D and the 1/4 flat
washers item B. Tighten all hardware at this time.
Step 4
At this point the bench assembly is very heavy. Be sure that no assemblers are injured in the
process of turning the bench over onto its pedestal leg and cabinet assemblies. Turn the bench
over onto its pedestal leg and cabinet assemblies being very careful not to damage the
worksurface by either drop it or by pulling on the pedestal leg or cabinet base too hard. When the
bench is turned over install the drawers into the cabinet and continue the assembly if other items
are needed.
