AC Meter & Temperature Two-In-One Sensor,
i4H-
TX-3AC
Warning: This device must be working in the environment under 600VAC and handled by professional user or
electric technician who has the knowledge of AC main power supply.
If user has to open the power distribution box then he must have the permission from the local power company and
wear insulating dielectric gloves for safety reason. Mishandling of this device may cause lethal harm to human
body.
INTRODUCTION
The
i4H-
TX-3AC is a battery operated wireless True RMS AC Meter/Temperature two-in-one sensor specially
designed for the
i4Home
System. With the AC clamp probe KT-87, it can measure the AC current up to 100A in 50 or
60 Hz. The measured data will be translated into 0-100 readings and transmit to the Base Unit by RF signal.
With wireless operation, the sensor can be put anywhere to monitor/record the AC current consumption and temperature
in a room, a chamber or a power distribution box. The system will issue a real time alarm if the reading is over the
high/low limits.
LED
To Clamp
(no Polarity)
Wiring Inlet
To Clamp
Test
Button
10A/100A
Selector
Hole to reach Test
Button inside
LED
ST-87
Clamp
Passing one
conductor only
Transmitter
